About size changing
RESIZE
About breath belt adjustment
We will adjust the bracelet of your purchased watch free of charge before shipping.
If you wish, please specify your bracelet size or measure your actual wrist circumference and let us know.
I will adjust it with a little leeway.
*Please note that we cannot accept returns after size adjustments have been made.。
*If you need to add a piece, please contact the manufacturer.
* The removed links will be sent together with the watch.
* We can also re-adjust the item, but you will be responsible for the shipping costs.
STEP
1
Prepare paper
Cut the paper into a strip to measure around your wrist.
STEP
2
Wrap around your wrist
Wrap the paper band you made in STEP 1 around your wrist, leaving a little slack.
Mark the place where you have completed the circle with a pen.
The best position to wear the watch is where it will be when you wear it, a little below the bone protrusion on the little finger side of your wrist.
STEP
3
Measure the length
Use your ruler to measure the length from the edge to the mark.
This length will be your wrist size.
If adjustments are required, please enter your actual measurements when ordering.
I will adjust it with a little leeway.
Adjusting the ring size
Regarding the Yukizaki original jewelry you purchased,
We offer free ring adjustment before shipping.
If you wish, please measure the specified ring size or the actual circumference of your finger and enter the number in the table below.
We will make the necessary adjustments.
*Please note that we cannot accept returns after size adjustments have been made.
*Depending on the ring design, adjustments may not be possible.
*Please note that adjustment may cause distortion of the ring.
STEP
1
Prepare paper
Cut the paper into a strip to measure around your finger.
STEP
2
Wrap it around your finger
Wrap the paper band you made in STEP 1 around the finger you want to wear the ring on.
Mark the place where you have completed the circle with a pen.
STEP
3
Measure the length
Use your ruler to measure the length from the edge to the mark.
This length will be the circumference of your finger.
STEP
4
Check the issue number
Please refer to the table below for the inner diameter and finger circumference and check the size.
When ordering, please enter the number.
| number | Ring inner diameter (mm) | Around the finger |
|---|---|---|
| No. 1 | 13.0mm | 40.8mm |
| No. 2 | 13.4mm | 41.9mm |
| No. 3 | 13.7mm | 42.9mm |
| No. 4 | 14.0mm | 44.0mm |
| No. 5 | 14.4mm | 45.0mm |
| No. 6 | 14.7mm | 46.1mm |
| No. 7 | 15.0mm | 47.1mm |
| No. 8 | 15.4mm | 48.2mm |
| No. 9 | 15.7mm | 49.2mm |
| No. 10 | 16.0mm | 50.3mm |
| No. 11 | 16.4mm | 51.3mm |
| No. 12 | 16.7mm | 52.4mm |
| No. 13 | 17.0mm | 53.4mm |
| No. 14 | 17.4mm | 54.5mm |
| No. 15 | 17.7mm | 55.5mm |
| No. 16 | 18.0mm | 56.5mm |
| No. 17 | 18.4mm | 57.6mm |
| No. 18 | 18.7mm | 58.6mm |
| No. 19 | 19.0mm | 59.7mm |
| No. 20 | 19.4mm | 60.7mm |
| No. 21 | 19.7mm | 61.8mm |
| No. 22 | 20.0mm | 62.8mm |
| No. 23 | 20.4mm | 63.9mm |
| No. 24 | 20.7mm | 64.9mm |
| No. 25 | 21.0mm | 66.0mm |